STNA Mechanic Trucks

Our "ServiceStar" and "Service Pro" Bodies are offered in an 11' and 14' single axle configuration and a 14' tandem axle configuration.

Bodies shown below are designed for 5500 series trucks.

Standard Features and Benefits:

• Integrated 24" deep workbench with a full pass through compartment with a heavy-duty step bumper.
• #10 gauge single panel reinforced doors with heavy-duty stainless steel three point locking door handles and gas charged struts.
• #14 gauge steel body construction.
• 60" tall oxy/fuel compartment with adjustable tank brackets and hose rack.
• 50" wide bed deck area with tread-plate floor with six heavy duty integrated chain type floor tied downs.
• Cabinet roof mounted air compressor mounting rails
• Integrated full length body drip rails
• 20" Deep main body compartments with automotive weather strip seals.
• Seven (7) galvanized shelves with divider capability.
• An integrated crane reinforcement that provides for full energy transfer.
• Heavy-duty sleeved energy absorbing sub-frame and crane pedestal base mount.
• Wired/wireless (twelve) 12 function crane controller with start stop and engine idle up with rechargeable nicad battery.
• Fixed street side downrigger with hydraulic up/down feature and a curb side manual extension outrigger with a hydraulic up/down feature and hydraulic system safety check valves.
• Rear step with heavy-duty hand rail.
• DOT approved flush mounted "LED" body light package.
• DOT approved fire extinguisher.
• DOT approved back up alarm.
• Heavy-duty removable tailgate.
• Stainless steel "bullet" type door hinges
• Contoured wheel wells with heavy-duty 2" rubber wheel lip moldings.
• Mud flaps.
• Road side safety triangle set.
• Hydraulic oil reservoir with hydraulic filter system an integrated body mounted hydraulic lines.
• "Saddle" type crane rest.
• An automotive grade wiring harness featuring weatherproof quick connect plugs, soldered connections (where possible) a central control panel with zoned quick reset circuit breakers, additional compartment drop down plug harness's for customer add on use and a full body wiring harness schematic.
• Rust inhibiting undercoating, is standard on all units.
• A nine (9) stage certified paint process using the finest automotive grade urethane pain system available.
• Crane capacity: to accept a 6,000lb or 8,000lb cranes (Note: Crane capacity may be limited based on specific model selected and chassis configuration and chassis GVW. Please contact the factory to determine the specific model you are interested in for specific crane capacities available.)

STNA Mechanic Trucks

Bodies shown below are designed for 5500 series trucks.

Standard Features and Benefits:

• Integrated 18" deep workbench with a full pass through compartment with a heavy-duty step bumper.
• #10 gauge single panel reinforced doors with heavy-duty stainless steel three point locking door handles and gas charged struts.
• #12 gauge steel body construction.
• 60" tall oxy/acc compartment with adjustable tank brackets and hose rack.
• 50" wide bed deck area with tread-plate floor with six heavy duty integrated chain type floor tied downs.
• Cabinet roof mounted air compressor mounting rails
• Integrated full length body drip rails
• 20" Deep main body compartments with automotive weather strip seals.
• Seven (7) galvanized shelves with divider capability.
• An independent crane tower that provides for full energy transfer into the sleeved sub-frame and not through the body cabinets, thereby reducing the potential for body cracking as found with many of our competitors units.
• Heavy-duty sleeved energy absorbing sub-frame and crane pedestal base mount.
• Wired/wireless (twelve) 12 function crane controller with start stop and engine idle up with rechargeable nicad battery.
• Fixed street side downrigger with hydraulic up/down feature and a curb side manual or optional hydraulic extension outrigger with a hydraulic up/down feature and hydraulic system safety check valves.
• Rear step with heavy-duty hand rail.
• DOT approved flush mounted "LED" body light package.
• DOT approved fire extinguisher.
• DOT approved back up alarm.
• Heavy-duty removable tailgate.
• Stainless steel "bullet" type door hinges
• Contoured wheel wells with heavy-duty 2" rubber wheel lip moldings.
• Mud flaps.
• Road side safety triangle set.
• Hydraulic oil reservoir with hydraulic filter system an integrated body mounted hydraulic lines.
• "Saddle" type crane rest.
• An automotive grade wiring harness featuring weatherproof quick connect plugs, soldered connections (where possible) a central control panel with zoned quick reset circuit breakers, additional compartment drop down plug harness's for customer add on use and a full body wiring harness schematic.
• Rust inhibiting undercoating, is standard on all units.
• A nine (9) stage certified paint process using the finest automotive grade urethane pain system available.
• Crane capacity: to accept a 6,000lb or 8,000lb cranes (Note: Crane capacity may be limited based on specific model selected and chassis configuration and chassis GVW. Please contact the factory to determine the specific model you are interested in for specific crane capacities available.)

STNA Mechanic Trucks

Bodies shown below are designed for 6500 series trucks.

Standard Features and Benefits:

• Integrated 18" deep workbench with a full pass through compartment with a heavy-duty step bumper.
• #10 gauge single panel reinforced doors with heavy-duty stainless steel three point locking door handles and gas charged struts.
• #12 gauge steel body construction.
• 60" tall oxy/acc compartment with adjustable tank brackets and hose rack.
• 50" wide bed deck area with tread-plate floor with six heavy duty integrated chain type floor tied downs.
• Cabinet roof mounted air compressor mounting rails
• Integrated full length body drip rails
• 20" Deep main body compartments with automotive weather strip seals.
• Seven (7) galvanized shelves with divider capability.
• An independent crane tower that provides for full energy transfer into the sleeved sub-frame and not through the body cabinets, thereby reducing the potential for body cracking as found with many of our competitors units.
• Heavy-duty sleeved energy absorbing sub-frame and crane pedestal base mount.
• Wired/wireless (twelve) 12 function crane controller with start stop and engine idle up with rechargeable nicad battery.
• Fixed street side downrigger with hydraulic up/down feature and a curb side manual or optional hydraulic extension outrigger with a hydraulic up/down feature and hydraulic system safety check valves.
• Rear step with heavy-duty hand rail.
• DOT approved flush mounted "LED" body light package.
• DOT approved fire extinguisher.
• DOT approved back up alarm.
• Heavy-duty removable tailgate.
• Stainless steel "bullet" type door hinges
• Contoured wheel wells with heavy-duty 2" rubber wheel lip moldings.
• Mud flaps.
• Road side safety triangle set.
• Hydraulic oil reservoir with hydraulic filter system an integrated body mounted hydraulic lines.
• "Saddle" type crane rest.
• An automotive grade wiring harness featuring weatherproof quick connect plugs, soldered connections (where possible) a central control panel with zoned quick reset circuit breakers, additional compartment drop down plug harness's for customer add on use and a full body wiring harness schematic.
• Rust inhibiting undercoating, is standard on all units.
• A nine (9) stage certified paint process using the finest automotive grade urethane pain system available.
• Crane capacity: to accept a 6,000lb or 8,000lb cranes (Note: Crane capacity may be limited based on specific model selected and chassis configuration and chassis GVW. Please contact the factory to determine the specific model you are interested in for specific crane capacities available.)

STNA Mechanic Trucks

Bodies shown below are designed for 7500 series trucks.

Standard Features and Benefits:

• Integrated 18" or 30" deep workbench with a full pass through compartment with a heavy-duty step bumper.
• #10 gauge single panel reinforced doors with heavy-duty stainless steel three point locking door handles and gas charged struts.
• #10 gauge steel body construction.
• 60" tall oxy/acc compartment with adjustable tank brackets and hose rack.
• 50" wide bed deck area with tread-plate floor with six heavy duty integrated chain type floor tied downs.
• Cabinet roof mounted air compressor mounting rails
• Integrated full length body drip rails
• 24" deep main body compartments with automotive weather strip seals.
• Seven (7) galvanized shelves with divider capability.
• An independent crane tower that provides for full energy transfer into the sleeved sub-frame and not through the body cabinets, thereby reducing the potential for body cracking as found with many of our competitors units.
• Heavy-duty sleeved energy absorbing sub-frame and crane pedestal base mount.
• Wired/wireless (twelve) 12 function crane controller with start stop and engine idle up with rechargeable nicad battery.
• Fixed street side downrigger with hydraulic up/down feature and a curb side manual or optional hydraulic extension outrigger with a hydraulic up/down feature and hydraulic system safety check valves.
• Rear step with heavy-duty hand rail.
• DOT approved flush mounted "LED" body light package.
• DOT approved fire extinguisher.
• DOT approved back up alarm.
• Heavy-duty removable tailgate.
• Stainless steel "bullet" type door hinges
• Contoured wheel wells with heavy-duty 2" rubber wheel lip moldings.
• Mud flaps.
• Road side safety triangle set.
• Curb side and street side main compartment master lock system in addition to individual door handle locks.
• Hydraulic oil reservoir with hydraulic filter system an integrated body mounted hydraulic lines.
• "Saddle" type crane rest.
• An automotive grade wiring harness featuring weatherproof quick connect plugs, soldered connections (where possible) a central control panel with zoned quick reset circuit breakers, additional compartment drop down plug harness's for customer add on use and a full body wiring harness schematic.
• Rust inhibiting undercoating, is standard on all units.
• A nine (9) stage certified paint process using the finest automotive grade urethane pain system available.
• Crane capacity: to accept a 6,000lb, 8,000lb and 10,000lb cranes (Note: Crane capacity may be limited based on specific model selected and chassis configuration and chassis GVW. Please contact the factory to determine the specific model you are interested in for specific crane capacities available.)

STNA Mechanic Trucks

Bodies shown below are designed for 7500 series trucks.

Standard Features and Benefits:

• Integrated 18" or 30" deep workbench with a full pass through compartment with a heavy-duty step bumper.
• #10 gauge single panel reinforced doors with heavy-duty stainless steel three point locking door handles and gas charged struts.
• #10 gauge steel body construction.
• 60" tall oxy/acc compartment with adjustable tank brackets and hose rack.
• 50" wide bed deck area with tread-plate floor with six heavy duty integrated chain type floor tied downs.
• Cabinet roof mounted air compressor mounting rails
• Integrated full length body drip rails
• 24" deep main body compartments with automotive weather strip seals.
• Seven (7) galvanized shelves with divider capability.
• An independent crane tower that provides for full energy transfer into the sleeved sub-frame and not through the body cabinets, thereby reducing the potential for body cracking as found with many of our competitors units.
• Heavy-duty sleeved energy absorbing sub-frame and crane pedestal base mount.
• Wired/wireless (twelve) 12 function crane controller with start stop and engine idle up with rechargeable nicad battery.
• Fixed street side downrigger with hydraulic up/down feature and a curb side manual or optional hydraulic extension outrigger with a hydraulic up/down feature and hydraulic system safety check valves.
• Rear step with heavy-duty hand rail.
• DOT approved flush mounted "LED" body light package.
• DOT approved fire extinguisher.
• DOT approved back up alarm.
• Heavy-duty removable tailgate.
• Stainless steel "bullet" type door hinges
• Contoured wheel wells with heavy-duty 2" rubber wheel lip moldings.
• Mud flaps.
• Road side safety triangle set.
• Curb side and street side main compartment master lock system in addition to individual door handle locks.
• Hydraulic oil reservoir with hydraulic filter system an integrated body mounted hydraulic lines.
• "Saddle" type crane rest.
• An automotive grade wiring harness featuring weatherproof quick connect plugs, soldered connections (where possible) a central control panel with zoned quick reset circuit breakers, additional compartment drop down plug harness's for customer add on use and a full body wiring harness schematic.
• Rust inhibiting undercoating, is standard on all units.
• A nine (9) stage certified paint process using the finest automotive grade urethane pain system available.
• Crane capacity: to accept a 8,000lb, 10,000lb and 12,000lb cranes (Note: Crane capacity may be limited based on specific model selected and chassis configuration and chassis GVW. Please contact the factory to determine the specific model you are interested in for specific crane capacities available.)